Disclosure: toolequipzone.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com.
A bearing puller is a tool used to remove and install bearings in equipment. They are often found on agricultural implements such as cultivators, tillers and plows – but they can be found almost anywhere there is an axle or other moving part that has a bearing.
The ATPEAM 3 Jaw Inner Bearing Puller (Bearing-Pulling Tool) I reviewed was designed by Australian Agricultural Technology Enterprises Australia Ltd., which operates out of Adelaide in South Australia. To use the tool you must firstly insert it into either side of the outer ring so that one jaw sticks outside and one inside where there will be place for your foot around the inner ring; then simply apply pressure until the teeth start biting into their designated holes leaving enough room for 2 fingers next to each hole – this releases tension from both sides allowing easy removal of any existing sealant or grease from within those spaces before installing new sealant or grease with ease through these same holes
Features of ATPEAM 3 Jaw Inner Bearing Puller
1. 3-Jaw Bearing Extractor Puller
2. Strong Puller Power
3. Stable & Safe
4. Blind Bearing Puller
5. Package Included: 1x 3-Jaw Inner Bearing Puller Tool
6. Size: 200x135mm
7. Wire rod length: 175mm
8. Bar length: 125mm
9. Arm length: 86mm
1. 3-Jaw Bearing Extractor Puller
This product is a 3-Jaw Bearing Extractor Puller. It’s an easy tool to use that can help you remove bearings with ease and without the risk of damaging them in any way, as it keeps all parts safely inside the housing. This puller has been designed for high precision work on automotive engines and industrial applications like aerospace manufacturing equipment such as CNC machine tools.
2. Strong Puller Power
A 3 jaw inner bearing puller is strong enough to handle any job. The sturdy and durable jaws are created with a unique design that makes the user feel like they’re grabbing onto something hard while pulling out the part they need. With its high-impact plastic construction, this tool will withstand rough use without breaking down over time.
3. Stable & Safe
The ATPEAM 3 Jaw Inner Bearing Puller is a well-made, solid piece of kit that gets the job done. The jaw design helps to secure your bearing or pull it out with ease, while the collar on the shaft prevents damage and makes sure you don’t lose any parts in case you need replacements.
4. Blind Bearing Puller
The ATPEAM 3 Jaw Inner Bearing Puller uses a 4th bearing puller to remove the inner and outer bearings at once. This is done by using two tools, one with an offset jaw on the end that will fit in between the inside of the motor shaft and shell, while another tool has a wide open jaw which can be used to grab onto both bearings simultaneously so they can be pulled out without having to use multiple separate tools for this task.
5. Package Included: 1x 3-Jaw Inner Bearing Puller Tool
The 3 jaw inner bearing puller is a must-have tool for your garage. Majority of the time you’ll need to replace or remove and install an inner race in order to change out bearings, which can be quite tedious without this handy tool. This one comes with 5 pieces so that it’s easy enough to carry around and not lose anything.
6. Size: 200x135mm
This is a handy tool for extracting bearings from engines. It fits in between the engine’s gears, and grabs hold of the bearing with its three jaw inner-bearing puller. The jaws don’t need to be opened or closed as they are held open by an extension spring that isn’t affected by heat generated during use.,
7. Wire rod length: 175mm
A 3 Jaw Inner Bearing Puller is a tool that can be used to remove inner bearings from the shaft of an ATPEAM saw. With its self-centering design, it removes any risk of damage to the bearing or frame and with wire rod length 175mm
8. Bar length: 125mm
Puller Tools like this one are essential when it comes to pulling out a jammed part. They come in handy for many different tasks such as those involving valve stems, bearings, spindles and engine parts.
9. Arm length: 86mm
The ATPEAM 3 Jaw Inner Bearing Puller has a long arm that allows you to reach deep into the dark depths of your engine. With its 9-inch length, it can be used for all three bearings at once or individually and easily remove worn, damaged or broken parts from within an engine. It is also easy to clean because it does not create any wear on the part being removed as well as other surfaces in close proximity such as cylinder walls
Reviews & Ratings of ATPEAM 3 Jaw Inner Bearing Puller
Our Rating: 4.3 Out of 5 Stars
The ATPEAM 3 Jaw Inner Bearing Puller is a strong, durable and reliable bearing puller designed for use in automotive repair shops. Its jaw design makes it easy to handle any sized bearings. It also features an adjustable tension dial so you can control how much force the jaws apply while pulling out your problematic bearings. The 12” long shaft allows the user to get into tight spaces with ease as well
It has received 4 stars on average from 23 customers who reviewed this product at the time of writing and its customer reviews are positive overall., with one reviewer saying “Great tool! I would recommend getting more than one if you do auto repairs though.” Other reviewers noted that “This is a really great tool,” and “I’m really happy with my purchase.”
With these comments from previous users, I think it’s safe to say that this product deserves our recommendation too
Conclusion
The ATPEAM 3 Jaw Inner Bearing Puller is a very easy to use and highly rated bearing puller. With its simple design, it can be used with any type of bearing (hydraulic, magnetic or plain) regardless if the bore size has already been bored out. This product is an excellent choice for anyone that wants a quality tool at an affordable price.
Watch This Video:
Related Tags
- puller tool
- gear puller
- 3 jaw puller
