Soldering Iron Tip Cleaner Review

Overview Soldering Iron Tip Cleaner Reviewwidth=

Recommended for these features->

✅ Cleaner with Tubber Pad

✅ No Water Needed – Soldering Iron Tip Does Not Cool Down

✅ Ball Design for Tin Slag Control

✅ Effective at Cleansing Multiple Points on Welding HeadCheck Price

1. Cleaner with Tubber Pad

If you’re a tech enthusiast, then you know that keeping your electronic equipment in top condition is essential. One of the most important things you can do to keep your devices clean and functioning properly is to use a soldering iron tip cleaner. The Tubber Pad on this cleaner helps remove any excess solder or other contaminants from the tips of your soldering irons, so they work like new again. Plus, it’s easy to use – just place the Tubber Pad over the tip of the soldering iron and press down firmly. Within seconds, the contaminants will be eliminated and your soldering iron will be ready for action!

2. No Water Needed – Soldering Iron Tip Does Not Cool Down

Soldering irons can be a real pain to keep clean. Not only is it hard to get all the gunk off, but the soldering iron tip can also cool down quickly, making it difficult to work with. That’s where this nifty little cleaner comes in. Simply fill up the included spray bottle with water and squirt it onto the soldering iron tip. The heat of the solder will start breaking down the tough build-up on the metal, freeing up your iron for easy cleaning.

3. Ball Design for Tin Slag Control

The 3. Ball Design for Tin Slag Control on the soldering iron tip cleaner from Hakko makes it easy to clean up any tin slag that may have accumulated on the hot iron tip during use. The ball design helps to disperse the tin slag evenly over the entire surface of the cleaning ball, so it’s easy to remove all the tin slag without having to resort to harsh scrubbing techniques. This is a great tool for anyone who uses a soldering iron regularly and wants to make sure their tip is always in perfect condition.

4. Effective at Cleansing Multiple Points on Welding Head

A soldering iron can be a dirty and dangerous tool if not properly cared for. The solder that is used to join two pieces of metal together can easily get onto the tip of the iron, making it difficult to clean. That’s where this Soldering Iron Tip Cleaner comes in handy. It effectively cleans the tip of the iron without any harsh chemicals, leaving it ready for another use.

Reviews & Ratings of Soldering Iron Tip Cleaner

Our Rating: 4.5 Out of 5 Stars

Check it out on Amazon-

The Soldering Iron Tip Cleaner Non-slip Solder Tip Cleaning Wire Ball & Base Holder Soft Coiled Brass Tip Cleaner Kit is a great tool for cleaning your soldering iron. It comes with a soft coil brass tip cleaner, and it has a non-slip base so you can easily move it around while you’re cleaning.
I found 18 customer reviews at the time of writing and they had awarded the Soldering Iron Tip Cleaner Non-slip Solder Tip Cleaning Wire Ball & Base Holder Soft Coiled Brass Tip Cleaner Kit 4.5 stars out of a possible 5 on average.
The customer reviews on Amazon are positive overall, but there were a few niggling points raised. One customer said, “This little tool rocks!” and another said, “works well to clean my soldering irons … holds its own against (the) competition’s products that cost 3 or 4 times as much.”
That makes it very easy for me to recommend the Soldering Iron Tip Cleaner Non-slip SolderTip Cleaning Wire Ball & Base Holder Soft Coiled BrassTip cleaner kit as well

Conclusion

The Soldering Iron Tip Cleaner from Harbor Freight is a great value for the price. It’s easy to use and comes with an adjustable light for good visibility in low-light conditions. The only downside is that it doesn’t have a built-in cooling fan, so you may need to keep it plugged into an outlet if you’re using it heavily or for long periods of time.

This Video Should Help:

Frequently Asked Questions

What removes oxidation from solder tip?

It is advisable to flush the tip multiple times with a rosin-activated, flux-cored solder in order to clean tips that have been oxidized as a result of the use of water-soluble and “no-clean” fluxes. Unless the oxidation has been allowed to build up substantially, this should eliminate the oxides.

Can you use steel wool to clean a soldering iron?

To get rid of rust and other tough stains, take a steel wool pad and gently wet it before rubbing it over the iron’s tip. The only cleaning product that may be used to safely remove rust or spots is steel wool. Sandpaper shouldn’t be used since it will damage solder iron tips.

How long should a soldering iron tip last?

After prolonged use, even premium soldering stations like Weller and Hakko get darker. However, as long as the tips remain shiny and the heating components don’t break. They often have a long lifespan. I’ve purchased cheap “Made in China” soldering irons that, after being used a couple of times, barely last a week.

What you should not do when soldering?

Safety in Soldering Never contact the soldering iron’s 400°C element! With tweezers or clamps, hold the wires that need to be heated. When used, keep the cleaning sponge damp. When not in use, always put the soldering iron back on the stand. Keep it off the worktop at all times. When not in use, turn the device off and unplug it.

Can you sand a soldering iron tip?

Does the tip seem dull and brown, corroded, or rusted? You may need the sandpaper at this point. Sand the tip until you begin to see some shine once again after allowing the iron to cool. The oxidation layer that inhibits the tip from heating up correctly, not the metal itself, should be removed.

Why does my soldering iron tip turn black?

The tip will oxidize from things in the air much more quickly due to the elevated temperature. Hopefully, a sponge will be able to remove it. After cleaning, always let it alone.

What causes solder not to stick?

The soldering iron’s temperature setting or the iron’s wattage being too low for the solder size you are using are the primary culprits for this problem. Check your solder substance and compare it to the wattage of your soldering iron if you discover that your solder isn’t sticking.

Why does my soldering iron not melt solder?

When compared to other metals and alloys, solder has an extremely low melting point. It should melt nearly rapidly, even with a 40W iron. The iron is not hot enough or even functioning if it isn’t melting the solder. Try piercing some paper with the point.

Related Tags

  • hakko 599b
  • tip tinner
  • solder tip tinner
  • solder cleaning wire
  • thermaltronics tip tinner
Welding Tools

About the Author

John Heiss

As an expert reviewer, John provides honest and reliable reviews on consumer electronic goods. As a young boy, John was always tech-savvy and managed to get his hands on the latest technology. However, he had had enough of purchasing devices only to find out that there is so much that brands don’t tell you about their products, John wanted to do his part in improving this for fellow consumers by sharing his own experience. He did just that on products that he was familiar with and realized he has a talent for this. John then followed an education that is geared toward comprehending the anatomy of electronic devices and tools, and how they are built. As a young man, John landed his previous job as a product reviewer which allowed him to cultivate his expertise in the field and has now decided to do so for himself. As the founder of Office Electronics Hub and Tool Equip Zone, John is passionate about shedding light on the good and bad about products that he uses himself on a regular basis.

View All Articles